imageCLASS MF7280 Reference Guide

Cleaning and Adjusting the Machine
3-56
3
Customizing Settings
Cleaning and Adjusting the Machine
This section describes the introductions of routine cleaning and the settings to
improve the print quality and to prevent paper jams which may occur when a variety
of functions are used.
Use of these settings will help you to clean the machine or to prevent a number of
problems before they occur.
Cleaning
Routine cleaning is needed for the long use of the machine. For more information
on the routine cleaning, see "Routine Cleaning," on p. 6-23. You can clean the
machine by the following settings:
■ Transfer Roller Cleaning
Clean the transcription roller in the main unit when the backside of paper is smudged with
printing. See "Transfer Roller Cleaning," on p. 6-30.
■ Fixing Unit Cleaning
Clean the fixing unit in the main unit when black streaks appear with printing or you
replace the cartridges. See "Fixing Unit Cleaning," on p. 6-32.
■ Feeder Cleaning
Clean the roller of the feeder when your originals have black streaks or appear dirty after
scanning them. See "Automatic Feeder Cleaning," on p. 6-37.