imageCLASS MF7280 Network Quick Start Guide

Software Installation Instructions
2-4
Installing Software
2
Software Installation Instructions
This section describes how to install the printer driver and other software included
on the CD-ROMs.
Installing a Printer and/or Fax Driver
IMPORTANT
• Do not connect the USB cable before installing the software. If you connect the USB
cable before installing the software and the Found New Hardware Wizard screen
appears, click [Cancel].
• For Windows NT/2000/XP/Server 2003, log on as Administrator to install the software.
• Make sure the machine is turned on before connecting the USB cable.
NOTE
• The UFR II printer driver is not available for Windows NT.
• In Windows NT, you cannot print and send a fax from your computer through a USB
connection.
• In Windows NT, you cannot use the Installer to install the PCL printer and fax drivers.
Double-click the [Setup.exe] icon in the PCL or FAX\us_eng folder on the CD-ROMs to
install the drivers.
• You cannot use the Installer to install the fax driver through the USB connection.
Double-click the [Setup.exe] icon in the FAX\us_eng folder on the UFR II Printer Kit/
Super G3 FAX Board CD-ROM to install the driver.
• In a USB environment, you cannot set up the printer configuration automatically or use
the Job Accounting feature.
• The following procedure is an example using the Installer on the UFR II Printer Kit/Super
G3 FAX Board CD-ROM.