imageCLASS MF7280 Network Quick Start Guide

Connecting the Machine
1-6
Connecting the Machine to a Network
1
IMPORTANT
• Do not connect or disconnect the USB cable in the following situations, as it may cause
your computer or the machine to operate poorly:
- When installing the printer driver
- When the computer is booting up
- When printing
• If you disconnect the USB cable with the computer or machine’s main power switch ON,
always wait at least five seconds before reconnecting the cable. Immediately
reconnecting the cable may cause your computer or machine to operate poorly.
• When the machine is connected to a personal computer via the USB cable, you will not
be able to use some of the utilities. (See Chapter 2, “Installing Software.”)
NOTE
• If the machine is connected to a computer with a USB cable, you can print a document
from your computer using the printer driver, or send a fax from your computer using the
fax driver.
• You cannot specify the computer connected to the machine through a USB connection as
a destination of the Send jobs or forwarding jobs. Also, with that computer, you cannot
use the Remote UI.
• The appropriate USB interface differs depending on the operation system of the
connected computer as follows. For more information, consult your local authorized
Canon dealer or call the Canon Support Center at 1-800-828-4040.
- Windows 98/Me: USB Full-Speed (USB 1.1 equivalent)
- Windows 2000/XP/Server 2003: USB 2.0 Hi-Speed/USB Full-Speed (USB 1.1
equivalent)