imageCLASS MF7280 Network Guide

Protocol Settings
3-16
3
Using a TCP/IP Network
20 Press [OK].
The display returns to the TCP/IP Settings screen.
21 Specify a MAC address filter.
● If you want to enable a MAC address filter:
❑
Press [▼] or [▲] until [Receiving MAC Address Settings] appears ➞ press
[Receiving MAC Address Settings].
❑ Press [On] for <Apply Settings>.
❑ Press [Register].
❑ Specify the MAC addresses to allow access to ➞ press [OK].
❑ Press [OK].
The display returns to the TCP/IP Settings screen.