imageCLASS MF7280 Network Guide

Protocol Settings
3-13
3
Using a TCP/IP Network
❑ Press a desired protocol key ➞ enter the number using - (numeric keys).
❑ Press [OK].
The display returns to the TCP/IP Settings screen.
● If you do not want to change the standard port number settings:
❑
Leave the settings at the default.
19 Specify an IP Address filter.
● If you want to enable an IP address filter:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [IP Address Range
Settings] appears ➞ press [IP Address Range Settings].