imageCLASS MF7280 Network Guide

Protocol Settings
3-12
3
Using a TCP/IP Network
17 Specify the HTTP settings.
❑ On the TCP/IP Settings screen, press [▼] or [▲] until [Use HTTP] appears ➞
press [Use HTTP].
❑ If you want to use the Remote UI, press [On]. Otherwise, press [Off].
Pressing [Off] for [Use HTTP] automatically sets [Remote UI] to 'Off'.
❑ Press [OK].
The display returns to the TCP/IP Settings screen.
NOTE
[Remote UI] can be set on the System Settings screen.
18 Specify the port number settings.
● If you want to change the standard port number settings:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [Port Number Settings]
appears ➞ press [Port Number Settings].