imageCLASS MF7280 Network Guide

Protocol Settings
3-9
3
Using a TCP/IP Network
13 Specify the LPD settings.
● If you want to use LPD as the print application:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [LPD Settings] appears ➞
press [LPD Settings].
❑ Press [On].
❑ Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.
● If you do not want to use LPD as the print application:
❑
On the TCP/IP Settings screen, press [▼] or [▲] until [LPD Settings] appears ➞
press [LPD Settings].
❑ Press [Off].
❑ Confirm the settings you specified ➞ press [OK].
The display returns to the TCP/IP Settings screen.