imageCLASS MF7280 Network Guide

Network Environment Setup Procedures

2-2

Basic Network Settings

Network Environment Setup Procedures

Before using the machine in a network environment, it is necessary to perform the

following setup procedures.

Network Cable Connection (See "Connecting the Machine," on p. 2-3.)

Connect the machine to the network using the network cables.

Interface Settings (See "Interface Settings," on p. 2-7.)

Specify the interface settings for communication between the machine and computers on your network. To

specify the settings, use:

• The machine's control panel

• The Remote UI (via a web browser)

Communication Environment Setup (See "Communication Environment Setup," on p. 2-12.)

Set up a configuration for communication between the machine and computers on your network.

IMPORTANT

If you are configuring the interface settings for the first time, use the control panel of this

machine. After configuring the TCP/IP settings, you can change the content by using the

Remote UI.