imageCLASS MF7280 Facsimile Guide

Scan Settings
2-12
2
Send and Receive Methods
3 Press [A] ➞ [OK].
The machine automatically adjusts the scan density to the level best suited to the
quality of the original.
The selected mode is set, and the display returns to the Send Basic Features
screen.
NOTE
An automatic scan density adjustment may not work with transparencies. In this
case, adjust the scan density manually by pressing [Light] or [Dark].
4 Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
• To cancel the scan settings, press the Scan Settings drop-down list ➞ press
[Option]
➞ [Cancel].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).