imageCLASS MF7280 Facsimile Guide

Scan Settings
2-11
2
Send and Receive Methods
4 Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
• To cancel the scan settings, press the Scan Settings drop-down list ➞ press
[Option] ➞ [Cancel].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).
Automatic Density Adjustment
This mode enables you to set the machine to automatically adjust the scan density
to the level best suited to the quality of the original.
NOTE
If you set the automatic density adjustment, the original type setting is disabled.
1 Place your originals ➞ specify the destination.
NOTE
• For instructions on placing your originals, see "Placing Originals," on p. 1-34.
• For more information on specifying the destination, see "Dialing Methods," on
p. 2-35.
2 Press the Scan Settings drop-down list ➞ press [Option].
If necessary, see the screen shot in step 2 of "Specifying the Document Size," on
p. 2-5.