imageCLASS MF7280 Facsimile Guide

Selecting a Scan Mode
2-2
2
Send and Receive Methods
Selecting a Scan Mode
You can set the scan mode in which a document is scanned. The machine has
three preset scan modes: B&W 200x200dpi, B&W 300x300dpi, and Color
300x300dpi.
Select the desired mode from the preset scan modes according to the type of
original you are sending.
IMPORTANT
If the destination is a fax number, the original is always scanned and sent in B&W mode.
NOTE
• If you want to use less memory and make the sending time shorter, use a lower
resolution mode.
• The default setting is 'B&W 200x200dpi'. You can change this setting in Edit Standard
Send Settings in TX Settings under <Common Settings> in Communications Settings
(from the Additional Functions screen). (See Chapter 7, "Customizing Communications
Settings," in the Sending Guide.)
• Color mode setting is not available for the fax function. You can select only the B&W
mode when sending faxes.
• In addition to the scan mode, you can store addresses and other send settings in the
favorites buttons. (See Chapter 7, "Customizing Communications Settings," in the
Sending Guide.)
1 Place your originals ➞ specify the destination.