imageCLASS MF7280 Facsimile Guide

Storing/Editing One-Touch Buttons

5-27

Storing/Editing Address Book Settings

Details of each item are shown below.

IMPORTANT

You cannot insert a pause or a space at the beginning of a number.

NOTE

•

You can enter up to 120 characters for the fax number.

•

If you enter a pause at the end of the number, the pause is always 10 seconds

long.

•

You can press (Clear) to clear your entry.

❑ If you want to set the optional settings for the destination, press [Option].

• Press [Sending Speed].

[Pause]: Press to insert a pause of several seconds in the fax number

you are dialing. If you insert a pause within the fax number, the

letter <p> is displayed between the numbers. If you insert a

pause at the end of the fax number, the letter <P> appears.

When dialing an overseas number, insert a pause after the

country code, and at the end of the fax number. (See "Pause

Time," on p. 4-9.)

[Tone]: Press when you want to directly call an extension line that is

connected to a PBX (Private Branch Exchange), which

accepts only tone signals. If you press [Tone], the letter <T>

appears.

[] []:

Press to move the position of the cursor.

[Backspace]: Press to delete the number or character immediately to the left

of the cursor.

[Space]: Press to insert a space between numbers.

[Option]: Press to specify the sending speed, type of call, and ECM TX

settings. These settings are optional.