imageCLASS MF7280 Facsimile Guide

Pause Time
4-9
4
Customizing Fax Settings
Pause Time
Some overseas dialing may be affected by the distance or complex routing of
connections when dialing the international access code, country code, and the
destination's telephone number all at once. In such cases, insert a pause after the
international access code. When the machine dials the number, it will pause where
the pause was inserted in the number. This helps to improve the connection.
NOTE
• You can insert a pause when you dial the fax number using - (numeric keys).
(See "Numeric Keys," on p. 2-36, and "New Address Tab," on p. 2-40.)
• Pauses entered at the end of dialed fax numbers are always 10 seconds long.
• The default setting is '2' seconds.
1 Press (Additional Functions) ➞ [Communications Settings]
➞ [TX Settings] under <Fax Settings>.
If necessary, see the screen shots in steps 1 and 2 of "ECM Transmission," on
p. 4-6.
2 Press [Pause Time].
NOTE
If the desired setting is not displayed, press [ ▼ ] or [ ▲ ] to scroll to the desired
setting.