imageCLASS MF7280 Facsimile Guide

Job Recall
2-54
2
Send and Receive Methods
Job Recall
You can recall the last three destinations, scan settings, and send settings which
have been set, and then send your documents.
IMPORTANT
• The machine considers any one of the following operations a send job:
- When settings, such as the destination, scan settings, and send settings, are specified,
and then the control panel power switch, (Start), or (Reset) is pressed
- When the Auto Clear mode activates after send settings are specified
• The Standard mode is not stored in Recall memory.
NOTE
The three most recent settings that were stored in memory are not erased even when the
power is turned OFF.
1 Press (SEND) ➞ place your originals ➞ press [Recall].
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.