imageCLASS MF7280 Facsimile Guide

Dialing Methods
2-43
2
Send and Receive Methods
5 Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts, and the document is sent to the specified destination.
One-Touch Buttons
You can specify up to 200 destinations in one-touch buttons.
Follow the procedure below to start a transmission and send a document with the
press of a one-touch button.
IMPORTANT
To use this feature, you must register destinations in one-touch buttons beforehand. (See
"Storing/Editing One-Touch Buttons," on p. 5-24.)
NOTE
A maximum of 501 destinations can be specified at the same time. (Out of the 501
destinations, one new destination can be specified using the New Address tab or
- (numeric keys).) If you specify a group, which is made up of several destinations,
each destination in the group is counted as a separate address.
1 Press (SEND) ➞ place your originals.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.