imageCLASS MF7280 Facsimile Guide

Dialing Methods
2-42
2
Send and Receive Methods
Details of each item are shown below.
IMPORTANT
You cannot insert a pause at the beginning of a number.
NOTE
• You can enter a maximum of 120 characters for the fax number.
• If you enter a pause at the end of the number, the pause is always 10 seconds
long.
• You can press (Clear) to clear your entry.
4 Press [OK].
The specified destination appears on the Send Basic Features screen.
IMPORTANT
The fax number you entered is not stored in the Address Book. It is deleted once
the document is sent.
NOTE
• To view the detailed information of the destination, press [Details].
• You can change or edit the destination on the Send Basic Features screen before
scanning. (See "Checking/Changing a Destination," on p. 2-50.)
• You can erase the destination on the Send Basic Features screen before scanning.
(See "Erasing a Destination," on p. 2-53.)
[Pause]: Press to insert a pause of several seconds in the fax number
you are dialing. If you insert a pause within the fax number, the
letter <p> is displayed between the numbers. If you insert a
pause at the end of the fax number, the letter <P> appears.
When dialing an overseas number, insert a pause after the
country code, and at the end of the fax number. (See "Pause
Time," on p. 4-9.)
[Tone]: Press when you want to directly call an extension line that is
connected to a PBX (Private Branch Exchange), which accepts
only tone signals. If you press [Tone], the letter <T> appears.
[][]:
Press to move the position of the cursor.
[Backspace]: Press to delete the number or character immediately to the left
of the cursor.
[Direct]: Press to use the Direct Send mode. (See "Direct Sending," on
p. 2-23.)
[Hook]: Press to use tone dialing or to send a fax document manually.
(See "Sending Fax Documents Manually," on p. 2-27.)