imageCLASS MF7280 Facsimile Guide

Dialing Methods
2-36
2
Send and Receive Methods
Numeric Keys
You can dial the fax number of one or more recipients using - (numeric keys)
on the control panel.
IMPORTANT
If Restrict New Addresses in System Settings (from the Additional Functions screen) is
set to 'On', you cannot specify a destination using - (numeric keys).
(See Chapter 9, "System Settings," in the Sending Guide.)
1 Press (SEND).
2 Place your originals.
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
3 Make sure the machine is ready to send ➞ enter the recipient's
fax number using - (numeric keys).
Details of each item are shown below.
[Pause]: Press to insert a pause of several seconds in the fax number you
are dialing. If you insert a pause within the fax number, the letter
<p> is displayed between the numbers. If you insert a pause at
the end of the fax number, the letter <P> appears. When dialing
an overseas number, insert a pause after the country code, and
at the end of the fax number. (See "Pause Time," on p. 4-9.)