imageCLASS MF7280 Facsimile Guide

Sending Methods
2-33
2
Send and Receive Methods
5 Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
The document is stored in memory, and then sent to the specified destination at
the specified time.
NOTE
• To cancel a delayed send job, press [Send Settings] ➞ [Delayed Send] ➞ [Cancel].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).
• You can also cancel a delayed send job from the System Monitor screen. (See
"Using the System Monitor Screen," on p. 1-45.)
Stamping Originals
The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front
side of scanned originals.
IMPORTANT
The Stamp mode cannot be used with the Document Size or Different Size Originals
mode.
1 Press (SEND) ➞ place your originals into the feeder ➞
specify the destination ➞ specify the desired send options ➞
press [Send Settings].
If necessary, see the screen shot in step 1 of "Delaying a Send Job," on p. 2-31.
Vertical placement Horizontal placement
ABC
ABC
Position at
which stamp
is applied.
Position at
which stamp
is applied.