MF6595CX Reference Guide

Back

TOP

3-3

Before Using the

Machine

Document and Paper

Copying

Sending and Receiving (MF6595cx/

MF6595/MF6590 Only)

Printing and

Scanning

Network (MF6595cx/MF6595/

MF6590/MF6540 Only)

Remote UI (MF6595cx/MF6595/

MF6590/MF6540 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Scan Settings

Before pressing [Start] to begin copying, you can adjust the

settings to better suit the document to be scanned. These

settings return to the default values if the Auto Clear function is

activated or if you press [Reset].

Image Quality

The default setting is <TEXT>.

1. Press [COPY].

2. Press [Image Quality] repeatedly to select the

document type.

<TEXT>: For text documents.

<PHOTO>: For documents that contain fine text or photos.

<TEXT/PHOTO>: For documents that contain text and photos.

Copy density automatically changes to the manual mode when

<TEXT/PHOTO> or <PHOTO> is set.

■

Density

You can adjust the density to the most appropriate level for the

document either automatically or manually.

The default setting is <MANUAL> (5).

Adjusting Automatically

1. Press [COPY].

2. Press [Density] to select <AUTO DENSITY>, then

press [OK].

The image quality is automatically set to <TEXT>.

■