imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-16
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)
3. DRPD:SELECT FAX Selects the ring pattern for fax calls.
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
–
–
–
–
–
4. INCOMING RING Sets whether the external telephone rings when it receives a voice call, enabling you to answer
the call. This function is only available when <RX MODE> is set to <FaxOnly> or <FaxTel>.
OFF The telephone does not ring when it receives a voice call. (In the Sleep mode, the telephone
may ring one or two times.)
ON The telephone rings when it receives a voice call if an external telephone is connected.
RING COUNT Sets the number of incoming rings before the machine answers. (1TIMES-99TIMES) (2TIMES)
5. REMOTE RX Sets whether to use remote receiving. This function is not available when <ENERGY IN SLEEP> in
<COMMON SETTINGS> is set to <LOW>. (See “Remote Reception,” on p. 4-27.)
ON The machine enables remote receiving.
REMOTE RX ID You can dial a code on remote extension to start receiving a document.
A combination of two characters using 0 to 9, * and # is possible (25).
OFF The machine disables remote receiving.