imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-8
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Editing One-Touch Speed Dialing Keys/Coded
Speed Dialing Codes
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3. Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED SPD DIAL>, then press [OK].
4. Press [ ] or [ ] to select the one-touch
speed dialing key (01 to 23) or coded speed
dialing code (00 to 99) you want to edit, then
press [OK].
You can also select a one-touch speed dialing key or coded speed
dialing code by pressing the corresponding one-touch speed dialing
key, or [Coded Dial] followed by the two-digit code.
5. Press [ ] or [ ] to select <TEL NUMBER
ENTRY>, then press [OK].
6. Press [Clear] repeatedly to go back to a wrong
digit.
You can also use [ ].
To delete all the numbers, press and hold [Clear].
7. Enter a new number with the numeric keys, then
press [OK].
8. Press [ ] or [ ] to select <NAME>, then press
[OK].
9. Press [Clear] repeatedly to go back to a wrong
character.
You can also use [ ] to move the cursor to the wrong character,
then press [Clear] to delete it.
To delete the entire name, press and hold [Clear].
10. Enter a new character with the numeric keys,
then press [OK].
You can also change the optional settings. For instructions, see
“Storing/Editing One-Touch Speed Dialing Keys/Coded Speed
Dialing Codes,” on p. 4-6.
11. Press [Stop] to return to the standby mode.
Deleting One-Touch Speed Dialing Keys/ Coded
Speed Dialing Codes
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3. Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED SPD DIAL>, then press [OK].
4. Press [ ] or [ ] to select the one-touch
speed dialing key (01 to 23) or coded speed
dialing code (00 to 99) you want to delete, then
press [OK].
You can also select a one-touch speed dialing key or coded speed
dialing code by pressing the corresponding one-touch speed dialing
key, or [Coded Dial] followed by the two-digit code.