imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-4
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Basic Sending Method
Follow this procedure to send faxes.
1. Set documents.
Place the first page on the platen glass if you are not using the ADF.
2. Press [FAX].
The FAX indicator lights up and the machine enters the fax standby
mode.
If you want to adjust the image quality and density, see “Scan
Settings,” on p. 4-5.
3. Enter the fax number with the numeric keys.
You can also specify the fax number with a one-touch speed dialing
keys, coded speed dialing codes or the [Address Book] key. (See
“Specifying Recipients,” on p. 4-13.)
4. Press [Start].
When you set the documents on the platen glass, press [ ] or [ ]
to select the document size, then press [Start] for each document.
When scanning is complete, press [OK] to start dialing.