imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
3-11
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
2 to 2-Sided
You can make two-sided copies from two-sided documents.
1. Set documents.
2. Press [COPY].
3. Press [2-Sided].
4. Press [ ] or [ ] to select <2 > 2-SIDED>, then
press [OK].
5. Press [ ] or [ ] to select <BOOK TYPE> or
<CALENDAR TYPE> (for the documents), then
press [OK].
<BOOK TYPE>: The front and back sides of the document have the
same top-bottom orientation.
<CALENDAR TYPE>: The front and back sides of the document have
opposite top-bottom orientations.
6. Press [ ] or [ ] to select <BOOK TYPE> or
<CALENDAR TYPE> (for the copies), then press
[OK].
7. Press [Start].
To cancel all settings, press [Reset].
When you set the document on the platen glass, press [Start] for
each document. When scanning is complete, press [OK].
You can skip steps 5 and 6. In this case, the machine scans two-
sided documents in the <BOOK TYPE> orientation and outputs
the same way.
If you press [Start] in step 5 after selected <CALENDAR TYPE>,
the machine scans two-sided documents in the <CALENDAR
TYPE> orientation and outputs the same way.
–
–
–
–
2 to 1-Sided
You can make one-sided copies from two-sided documents.
1. Set documents.
2. Press [COPY].
3. Press [2-Sided].
4. Press [ ] or [ ] to select <2 > 1-SIDED>, then
press [OK].
5. Press [ ] or [ ] to select <BOOK TYPE> or
<CALENDAR TYPE>, then press [OK].
<BOOK TYPE>: The front and back sides of the document have the
same top-bottom orientation.
<CALENDAR TYPE>: The front and back sides of the document have
opposite top-bottom orientations.
6. Press [Start].
To cancel all settings, press [Reset].
When you set the document on the platen glass, press [Start] for
each document. When scanning is complete, press [OK].
You can skip step 5. In this case, the machine scans two-sided
documents in the <BOOK TYPE> orientation to make one-sided
copies.
–
–
–