MF6595CX Basic Operation Guide

12-25

Machine Settings

ADJUST./CLEANING

8. SPECIAL MODE Q Enable this setting if black or white spots appear on the printed

image.

OFF

–

9. SPECIAL MODE R Sets whether to prevent white streaks from appearing on

the printed image. When you print the halftone image or

photograph after the machine has not undergone any operation

for a while, the first page of printouts may have thin white

streaks on the printed image.

OFF

–

10. SPECIAL MODE S Sets whether to reduce the waiting time for the next printout.

When you change the paper size after continuous printing, the

machine may take a while to start the next printing.

OFF Does not reduce the waiting time next set of printout.

SPEED PRIORITY Reduces the waiting time to start the next set of printout. Print

speed has priority; however, a condition that an previously

printed image also appears faintly on the next output may

occur.

11. CONT. PRINT MODE Sets whether to prevent the back edge of the previous page

from appearing on the following page during continuous

printing of half-tone prints or photographs.

OFF

–

12. BACK EDGE MODE Sets whether to prevent back edge of paper from smudging.

OFF

–