MF6595CX Basic Operation Guide

Machine Settings

12-24

ADJUST./CLEANING

Setting Item Description

1. TRANS. ROLR CLEAN Cleans the transcription roller. (See “Transcription Roller,” on

p. 10-11.)

2. FIX.UNIT CLEANING Cleans the fuser roller. (See “Fuser Roller,” on p. 10-6.)

3. FEEDER CLEANING Cleans the ADF. (See “Cleaning the ADF Automatically,” on

p. 10-10.)

4. SPECIAL MODE M Sets to improve print quality or fix irregular print density. If print

quality decreases or an irregularity in the print density appears,

transcription output may not function adequately.

MID Selects in normal conditions.

LOW Selects to compensate for poor print quality that occurs when

using paper that was stored for a long time at high temperatures

and high humidity.

HIGH Selects to compensate for poor quality that occurs when using

heavyweight paper.

5. SPECIAL MODE N When the two-sided printing function is used, paper may curl

severely or become jammed. Enable this setting to prevent

paper curling or jamming.

OFF

–

6. SPECIAL MODE O This setting is not functional in this model.

7. SPECIAL MODE P Sets to activate when lightweight paper or paper which is easy

to get uneven print density is used for printing.

OFF

–