MF6595CX Basic Operation Guide

Machine Settings

12-22

PRINTER SETTINGS

7. CUSTOM PAPER Sets whether to use a custom paper size.

OFF Disables you to specify a custom paper size.

ON Enables you to specify a custom paper size.

1. UNIT OF

MEASURE

Selects the unit of measurement to specify a custom paper size.

INCHES

MILLIMETERS

–

2. X DIMENSION Specifies the horizontal size of the custom paper.

(05.00–14.00 inches (127–356 mm)) (14.00)

3. Y DIMENSION Specifies the vertical size of the custom paper.

(03.00–08.50 inches (76–216 mm)) (08.50)

8. APPEND CR TO LF Sets whether to append a carriage return (CR) when line feed

code (LF) is received.

NO The print head moves down to the next line when line feed

code is received, and the margin does not change (such as the

beginning of the next line).

YES The print head moves to the beginning of the next line when

line feed code is received.

9. ENLARGE A4 Sets whether to expand the printable area of A4 size paper to

that of Letter size in width.

* This setting is applicable for A4 paper and portrait orientation for the

PCL5 printing only. The PCL6 printing is not supported.

OFF All the area on a page 1/8 inch (4.23 mm) from the top, bottom,

left, and right edges is available for printing on A4 paper.

ON All the area on a page 1/8 inch (4.23 mm) from the top and

bottom edges and 1/8 inch (1.28 mm) from the left and right

edges is available for printing on A4 paper. Only the width

increases.

11. RESET PRINTER Clears all print jobs in progress and resets the printer function.

OFF

–

*** MF6595cx/MF6595 only