MF6595CX Basic Operation Guide

12-15

Machine Settings

FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)

4. RX SETTINGS Sets the reception functions.

1. ECM RX Sets whether the ECM (Error Correction Mode) reception is

activated.

OFF

–

2. FAX/TEL OPT. SET Sets the optional items in the <FaxTel> mode. (See Chapter 4,

“Sending and Receiving (MF6595cx/MF6595/MF6590 Only),” in

the Reference Guide.)

1. RING START TIME Sets the time the machine takes to check whether a call is a fax

or a voice call. (0SEC–30SEC)(6SEC)

2. F/T RING TIME Selects the ring length for voice calls. (15SEC–300SEC)(15SEC)

3. F/T SWITCH ACTION Selects whether the machine switches to the receive mode after

the ring time has elapsed, or whether if disconnects the call.

RECEIVE

DISCONNECT

–

3. DRPD:SELECT FAX Selects the ring pattern for fax calls.

DOUBLE RING

SHORT-SHORT-LONG

SHORT-LONG-SHORT

OTHER RING TYPE

NORMAL RING

–

4. INCOMING RING Sets whether the external telephone rings when it receives a

voice call, enabling you to answer the call. This function is only

available when <RX MODE> is set to <FaxOnly> or <FaxTel>.

OFF The telephone does not ring when it receives a voice call. (In the

Sleep mode, the telephone may ring one or two times.)

ON The telephone rings when it receives a voice call if an external

telephone is connected.

RING COUNT Sets the number of incoming rings before the machine answers.

(1TIMES–99TIMES)(2TIMES)