MF6595CX Basic Operation Guide

Machine Settings

12-14

FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)

3. TX SETTINGS Sets the transmission functions.

1. ECM TX Sets whether the ECM (Error Correction Mode) transmission is

activated.

OFF

–

2. PAUSE TIME Sets the pause time when you insert pause into the dialing

sequence. (1SEC–15SEC)(2SEC)

3. AUTO REDIAL Sets whether to redial automatically when the other line is busy

or a transmission error occurs. (See Chapter 4, “Sending and

Receiving (MF6595cx/MF6595/MF6590 Only),” in the Reference

Guide.)

ON Customizes the redial operation.

1. REDIAL TIMES Sets the number of retries. (1TIMES–10TIMES)(2TIMES)

2. REDIAL INTERVAL Sets period of time before redialing. (2MIN.-99MIN.)(2MIN.)

3. TX ERROR REDIAL Sets whether the machine redials automatically when

transmission error occurs.

OFF

–

OFF After the first attempt at dialing fails, redialing is not attempted.

4. TIME OUT Sets whether to scan a document automatically after entering

the fax number.

* This function is not available when you dial with the numeric keys.

OFF

–

5. DIALING LINE CHCK Sets whether to check the telephone line condition.

OFF

–