imageCLASS MF6540/MF6590/MF6595/MF6595CX Basic Operation Guide

11-9
Troubleshooting
Message Description Action
MEMORY FULL The machine is full of jobs.– Print, send, or delete any
documents stored in
memory.
–
Divide the document stack
or data into a few parts and
try again one by one.
–
Send the document with
low resolution.
–
When this message appears
during using the ADF, the
scanning document stops
halfway In this case, clear the
paper jam from the ADF.
–
The number of fax jobs that
can be stored in memory
reached the maximum.
– The maximum numbers
of jobs that can be stored
in memory are as follows
(Based on the condition that
the other party sends the
fax by the MF6590/MF6595/
MF6595cx with ITU-T No.1
Chart standard mode);
Up to 70 jobs for sending or
90 jobs for receiving, or 95
fax jobs including sending
and receiving jobs.
Wait for the machine to
send any faxes in memory.
Also print, send, or delete
any documents stored in
memory.
–
NO APPROPRIATE SIZE Although <PAPER SELECT> is
set to <AUTO> in <STANDARD
SETTINGS> in the <COPY
SETTINGS> menu, appropriate-
sized paper is not set in the
paper cassette nor on the
multipurpose tray.
Select the paper size, or set the
copy ratio. If you press [Start]
while this message is displayed,
the paper with the least margin
is selected automatically and
printing starts.