Service manual

Chapter 4
4-12
F-4-36
3) Remove the screw [1], and then remove the pickup solenoid [2].
F-4-37
4.4.14 Registration Solenoid
4.4.14.1 Removing the Registration Solenoid
0011-5241
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the feed frame unit.
2) Remove the three screws [1], and then remove the drive unit [2].
F-4-38
3) Remove the screw [1], and then remove the pickup solenoid [2].
F-4-39
4.4.15 Release Solenoid
4.4.15.1 Removing the Release Solenoid
0011-5243
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the rear cover.
2) Remove one connector [1] and one screw [2], and then remove the release
solenoid [3].
F-4-40
4.4.16 Separation Pad
4.4.16.1 Removing the Separation Pad
0011-5237
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Open the open/close cover.
2) Release the two claws [1], and then remove the separation pad [2].
F-4-41
When reinstalling the separation pad, be sure to put the spring [2] in the
groove [1].
F-4-42
[1]
[2]
[1]
[2]
[1]
[2]
[2] [1]
[1]
[3]
[2]
[1]
[1]
[2]
[1]
[2]
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com