Service manual

Chapter 1
1-13
1.2.4 Maintenance by the User
1.2.4.1 User Maintenance Items
0012-7145
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
T-1-5
1.2.4.2 Cleaning
0012-7146
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
The parts that should be cleaned by the customer to maintain the design performance and the cleaning method are described below.
The service engineer should instruct the customer to clean the machine at regular intervals (once a month).
1. Pressure Plate
Clean the pressure plates [1] with a cloth dampened with water or neutral detergent and squeezed hard, and then wipe it with a dry soft cloth.
F-1-11
2. Copyboarg Glass (large/small)/Copyboard holder (jump board)
Clean the copyboard glass (large) [1], copyboard glass (small) [2] and copyboard holder (jump board) [3] with a cloth dampened with water or neutral detergent
and squeezed hard, and then wipe them with a dry soft cloth.
F-1-12
3. Cleaning the Fixing Pressure Roller
If black streaks are seen on the printed paper, the fixing pressure roller can be dirty. If black streaks are seen on the printed paper, clean the fixing pressure roller
in the user mode. Be sure to clean the fixing pressure roller after replacing the toner bottle.
No. Item Maintenance cycle
[1] Pressure plate cleaning As required
[2] Copyboard glass(large/small) cleaning, Copyboard
holder (jump board)
As required
[3] Fixing pressure roller cleaning As required
[4] Transfer roller cleaning As required
[5] ADF roller cleaning As required
[6] Exterior cleaning As required
[7] Toner cartridge replacement When the message appears
[1]
[2]
[1]
[3]
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com