Service manual

Chapter 14
14-20
14.8 Download (DOWNLOAD)
14.8.1 Download
0011-4218
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
The following parts of this unit can be upgraded by executing download mode using the service support tool (SST) (for more information, see the "Upgrading"
section):
Main unit
- Flash ROM (system + boot) mounted on the image processor PCB
- ROM mounted on the PCL board
14.9 Data Initialization Mode (CLEAR)
14.9.1 Clear
0011-4220
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
14.10 ROM Management (ROM)
14.10.1 ROM display
0011-4222
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
The table below lists the items of ROM display mode that are supported.
T-14-22
Group Item Explanation
TEL & USER DATA Clears all user-registered and -set areas of telephone registration data and user data.
(Telephone registration refers to the registration of codes on one-touch dialing,
abbreviated dialing, and group dialing.)
SERVICE DATA Clears the system dump list, except for counters and clear dates.
COUNTER Clears the maintenance counter, parts counter and mode-specific counters.
Initializes the counter (numerator) in the system dump list.
TYPE Initializes user data and service data to suit specified destination settings.
SOFT-CNT Not used
HST ACTIVITY Initializes the activity report
ACCOUNT Clears print histories.
JAM Clears the jam history.
ERR Clear the error (error code) history.
ALARM Clears the alarm history.
CARD Not used
ERR E355 Not used
E719 Not used
PWD Clears the system administrator's password.
FILE SYSTEM Not used
FORMAT*1 USB MEMORY Format the USB memory. (This mode is used when the USB memory error is damaged
and E744 occurs.)
LICENSE
DRIVE
Not used
ALL Clears user and service data (except for some scan parameters and print parameters),
and the counter setting/registration data in the system dump list, except for the print
count.
Item Explanation
MAIN Displays the version number of the ROM (SYSTEM) mounted on the image
processor PCB.
MAIN2 Displays the version of the ROM (BOOT) mounted on the image processor
PCB.
ECONT Displays the version number of the ROM mounted on the DC controller PCB.
OPROM Displays the version number of the option ROM.
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com