Service manual

Chapter 14
14-13
14.6 Counter Indication (COUNTER)
14.6.1 Counters
0011-4243
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be used to gain rough measures of when to replace supplies. The counter
set increments by one on counting each sheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).
T-14-19
T-14-20
14.6.2 Clearing Counters
0011-4244
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
- Maintenance/parts counter all clear
Execute service mode > CLEAR > COUNTER to clear all maintenance/parts counters.
- Counter clear on parts replacement
Press the numeric keypad key 0 after displaying the counter for a part just replaced, and the counter will be cleared individually.
Maintenance counter list
Item Counter Explanation
TOTAL (Total counter) SERVICE1 Service total counter 1
SERVICE2 Service total counter 2
TTL Total counter
COPY Total copy counter
PDL-PRT PDL print counter
FAX-PRT Fax print counter
REP-PRT Report print counter
2-SIDE Double-sided copy/print counter
SCAN Scan counter
PICK-UP (Paper pickup counter) C1 Cassette 1 jam counter
C2 Cassette 2 jam counter
C3 Cassette 3 jam counter
C4 Cassette 4 jam counter
MF Manual feed tray pickup total counter
2-SIDE Double-sided paper pickup total counter
FEEDER (Feeder related counters) FEED Feeder pickup total counter
DFOP-CNT ADF open/close hinge counter
JAM (Jam counters) TTL Unit total jam count
FEEDER Feeder total jam count
SORTER Finisher total jam count
2-SIDE Duplex unit jam counter
MF Manual feed tray jam counter
C1 Cassette 1 jam counter
C2 Cassette 2 jam counter
C3 Cassette 3 jam counter
C4 Cassette 4 jam counter
MISC (Other required counter) WST-TNR Waste toner counter
Parts counter list
Item Counter Explanation Service life
DRBL-1 (Unit supplies) FX-UNIT Fixing unit paper pass count 150,000
TR-ROLL Transfer charger roller high-voltage ON count 150,000
DV-UNT-C Developing unit rotation count 150,000
M-PU-RL Manual feed tray pickup roller paper pass count 150,000
M-SP-PD Manual feed tray separation pad paper pass count 150,000