Service manual

Chapter 14
14-10
1: FOOLSCAP
2: OFFICIO
3: E_OFFICIO
4: G_LTR_R
5: A_LTR_R
14.5 Printer Function Settings (PRINTER)
14.5.1 Service Soft Switch Settings (SSSW)
14.5.1.1 SSSW-SW05
14.5.1.1.1 List of Functions
0011-4190
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
T-14-15
14.5.1.1.2 Detailed Discussions of Bit 7
0011-4191
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Use it to enable/disable placement of priority on recording in sub scanning direction.
T-14-16
*: Image B4 or shorter and that cannot be printed by division and on A4 recording paper.
14.5.1.2 SSSW-SW14
14.5.1.2.1 List of Functions
0011-4192
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
T-14-17
14.5.1.2.2 Detailed Discussions of Bit 0
0011-4193
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Select whether to enable or disable transfer bias pressure reduction mode.
Select "Enable" to avoid image defects (black spots) produced by transfer bias leaks occurring in a low-pressure region, such as one at a high altitude. This setting
regulates the transfer bias to keep it from exceeding a predetermined level during printing.
14.5.1.2.3 Detailed Discussions of Bit 2
0011-4194
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Select whether to enable or disable black belt addition mode. If the user uses paper that causes fixed toner on paper to be fused and adhered to drum, selecting
"Yes" will clean the drum by forming a black band on the drum surface during the reverse rotation which is performed after printing on 50 sheets.
14.5.1.2.4 Detailed Discussions of Bit 4
0011-4195
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Select whether to enable or disable flicker reduction mode. Select "Enable" and enter a count to modify fusing temperature control to cancel fluorescent flicking
Bit Function 1 0
0 not used - -
1 not used - -
2 not used - -
3 not used - -
4 not used - -
5 not used - -
6 not used - -
7 priority on recording in sub scanning direction place do not place
place: if B4 recording paper and A4 recording paper are set and an A4 extra-long image
(*) is received, printing will be on the B4 recording paper.
do not place: if B5 horizontal recording paper and A4 recording paper are set and a B4 image is
received, printing will be by division and on B5 horizontal recording paper.
Bit Function 1 0
0 Transfer bias pressure reduction mode Enable Disable
1 Not used - -
2 Black belt addition mode Enable Disable
3 Not used - -
4 Flicker reduction mode Enable Disable
5 Silent mode Enable Disable
6 Terminal temperature rise Not used - -
7 Pre-rotation extension mode Enable Disable
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com