Service manual

Chapter 9
9-4
9.4 Parts Replacement Procedure
9.4.1 External Cover
9.4.1.1 Detaching the Reader Rear Cover (Small)
0011-5392
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the screw [1], and then detach the reader rear cover (small).
F-9-4
9.4.1.2 Detaching the Reader Rear Cover
0011-5393
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Open the ADF.
2) Detach the reader rear cover.
3) Remove the three screws [1], disconnect the three connectors [2], and then
remove the ground wire [3].
4) While pushing the reader rear cover [5] upward with your finger to release
the claw [4], slide the cover backward to remove it.
F-9-5
9.4.1.3 Detaching the Rear Cover
0011-5394
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) To release the hooks at the back of the machine, move the machine
backward until the hooks are about 10 cm away from the edge of the desk
and so on.
2) Remove the screw [1].
3) Release the three claw s[2] at the right and the two claws [3] at the top.
4) Release the two claws [4] at the bottom, and then detach the rear cover [5].
[1]
[4]
[5] [1]
[1]
[3] [2]
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com