Service manual

Chapter 8
8-5
F-8-9
8) Remove the four screws [1], and then remove the fixing unit [2].
F-8-10
F-8-11
When reinstalling the fixing unit, align it with the mark [1].
F-8-12
If a parallelism error occurs during duplex printing, make the following ad-
justment:
Attach the clamping plate [1] removed in step 2 using the screw as shown
below.
If the same error persists, change the clamping position stepwise.
F-8-13
8.4.2 Fixing Film Unit
8.4.2.1 Removing the Fixing Film Unit
0011-5388
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the fixing unit.
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[1]
[2]
[1]
[1]
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com