Service manual
Chapter 7
7-10
F-7-27
3) Remove the two bosses [1], disconnect the connector [2], and then slide
the registration sensor unit [3] toward you to remove it.
F-7-28
4) Remove the registration sensor [1] by releasing the hook.
F-7-29
7.6.12 Duplex Pick-up Solenoid
7.6.12.1 Removing the Duplex Pickup Solenoid
0011-5380
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the left cover and rear-right cover.
2) Remove the fan duct, main motor, relay PCB, registration clutch, pickup
drive unit, main drive unit, and fixing/drive unit.
3) Remove the screw [1], and then remove the duplex pickup solenoid [2].
F-7-30
When installing the duplex pickup solenoid, be sure to install the solenoid le-
ver [1] on the arm [2].
F-7-31
7.6.13 Registration Clutch
7.6.13.1 Removing the Registration Clutch
0011-5379
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the rear cover.
2) Remove the connector [1] and E-ring [2], and then remove the registration
clutch [3].
F-7-32
7.6.14 Main Motor
7.6.14.1 Removing the Main Motor
0011-5476
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the rear cover.
[1]
[2]
[2] [3]
[1]
[1]
[1]
[2]
[2]
[1]
[3]
[1] [2]
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com