Service manual

Chapter 7
7-9
[3].
F-7-22
6) Remove the two screws [1] and move the guide [2] out of the way.
7) Remove the drum shutter lever 1/2 [3].
F-7-23
8) Remove one E-ring [1], two bearings [2], and left registration roller [3].
F-7-24
When reinstalling the right registration roller, the grounding spring [2] must
be in touch with the end [1] of this roller. It is recommended to use tweezers
when reinstalling the E-ring [3].
F-7-25
7.6.11 Registration Sensor
7.6.11.1 Removing the Registration Sensor
0011-5383
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the two shafts [1], and then remove the transfer guide [2].
F-7-26
2) Release the two hooks [1], and then detach the registration sensor cover
[2].
[1]
[2]
[3]
[1]
[2]
[2]
[1]
[3]
[2]
[3]
[1]
[2]
[3]
[1]
[2]
[1]
[1]
[2]
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com