imageCLASS MF6500 Series Advanced Guide

1
2
3
4
5
6
7
8
TOP
Back Previous Next
3-14
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
Reports and Lists
Troubleshooting
Appendix
7. Specify the TCP/IP protocol.
[Subnet] If the computer on which NetSpot
Device Installer runs is connected to
more than one network, select the
subnet that the desired device belongs
to.
[Product Type] Select the product name of your
machine. If the product name of your
machine is not displayed, select
[imageCLASS MF6580/6560].
[Frame Type] Select [Ethernet II].
[IP Address Settings with]
Select the method for setting the IP
address.
[Manual Setting]:
You need to set the IP address manually.
The IP address that you enter in [IP
Address] is assigned to the network
board.
[DHCP]:
The IP address is automatically
obtained via DHCP (a DHCP server
needs to be active on the network).
[IP Address] Enter the IP address assigned to the
network board.