imageCLASS MF6500 Series Advanced Guide

1
2
3
4
5
6
7
8
TOP
Back Previous Next
1-16
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
Reports and Lists
Troubleshooting
Appendix
5. Use the numeric keys, one-touch speed
dialing key, coded speed dialing code, or
address book dialing to enter a recipient.
You can send the same document to a maximum of 124
recipients, at a preset time.
6. Press [Start].
NOTE
– When <TIME OUT> is set to <ON> in <TX SETTINGS> in
<FAX SETTINGS>, the machine starts dialing automatically
after the preset time for this setting is passed. However, when
you manually enter a recipient, be sure to press [Start].
– If the specified time for delayed sending passes during a
temporary power failure (that recovers within a hour), the fax
document will be sent at the specified time on the next day.
■ Sending Two-Sided Documents
You can set the machine to automatically turn over two-sided
documents in the ADF, and scan each side separately.
1. Set documents in the ADF.
2. Press [FAX].
3. Press [Two-Sided].
4. Use [ ] or [ ] to select <BOOK TYPE> or
<CALENDAR TYPE>, then press [OK].
<BOOK TYPE>: The front and back sides of the document have
the same top-bottom orientation.
<CALENDAR TYPE>: The front and back sides of the document
have opposite top-bottom orientations.
5. Use the numeric keys, one-touch speed
dialing key, coded speed dialing code, or
address book dialing to enter a recipient.
6. Press [Start].
To cancel all settings and return to standby mode, press [Stop].
NOTE
– When <TIME OUT> is set to <ON> in <TX SETTINGS> in
<FAX SETTINGS>, the machine starts dialing automatically
after the preset time for this setting is passed. However, when
you manually enter a recipient, be sure to press [Start].
– If the specified time for delayed sending passes during a
temporary power failure (that recovers within a hour), the fax
document will be sent at the specified time on the next day.