imageCLASS MF6500 Series Advanced Guide

1
2
3
4
5
6
7
8
TOP
Back Previous Next
1-11
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
Reports and Lists
Troubleshooting
Appendix
6. Confirm that <PASSWORD> is displayed,
then press [OK].
7. Use the numeric keys to enter the memory
reception password (up to seven digits), then
press [OK].
8. Confirm that <REPORT PRINT> is displayed,
then press [OK].
9. Use [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: Prints a memory reception report.
<OFF>: Does not print a memory reception report.
10.Confirm that <MEMORY RX TIME> is
displayed, then press [OK].
Perform steps 10 to 15 to specify the period of memory reception.
11.Use [ ] or [ ] to select <ON>, then press
[OK].
12.Confirm that <MEM RX START TIME> is
displayed, then press [OK].
13.Use the numeric keys to enter the start time
(in 24-hour format), then press [OK].
14.Confirm that <MEM. RX END TIME> is
displayed, then press [OK].
15.Use the numeric keys to enter the end time,
then press [OK].
16.Press [Stop] to return to standby mode.
Printing All Documents Stored in Memory
1. Perform steps 1 to 3 in “Memory Reception,”
on p. 1-10.
2. Use [ ] or [ ] to select <MEMORY
LOCK>, then press [OK]
PASSWORD
1234567
Ex.
MEM RX START TIME
00:00
Ex.