imageCLASS MF6500 Series Basic Guide

13-16
Machine Settings
4. INCOMING RING Sets whether the machine rings when it receives a voice
call, enabling you to answer the call. This function is only
available when <RX MODE> is set to <FaxOnly> or
<FaxTel>.
OFF The telephone does not ring when it receives a voice call. (In
Sleep mode, the telephone may ring one or two times.)
ON The telephone rings when it receives a voice call if an
external telephone is connected.
RING COUNT Sets the number of incoming rings before the machine
answers. (1TIMES-99TIMES)
5. REMOTE RX Sets whether to use remote receiving. This function is not
available when <ENERGY IN SLEEP> in <COMMON
SETTINGS> is set to <LOW>. (See Chapter 1, “Advanced
Fax Features,” in the Advanced Guide.)
ON The machine enables remote receiving.
REMOTE RX ID You can dial a code on remote extension to start receiving a
document.
A combination of two characters using 0 to 9, * and # is
possible.
OFF The machine disables remote receiving.
6. MANUAL/AUTO Sets whether the machine switches to document receive
mode after the external telephone rings for a specified
length of time in manual receive mode.
OFF The external telephone keeps ringing until someone
answers the call manually.
ON The machine switches to document receive mode after the
external telephone rings for a specified time.
F/T RING TIME Sets the length of time to elapse before the machine
switches to document receiving. (1SEC-99SEC)
FAX SETTINGS (MF6550/MF6560/MF6580 Only)