imageCLASS MF6500 Series Basic Guide

13-15
Machine Settings
4. TIME OUT Sets whether to scan a document automatically after
entering the fax number.
* This function is not available when you dial with the numeric keys.
–ON
–OFF
5. DIALING LINE CHCK Sets whether to check the telephone line condition.
–ON
–OFF
4. RX SETTINGS Sets the reception functions.
1. ECM RX Sets whether the ECM (Error Correction Mode) reception is
activated.
–ON
–OFF
2. FAX/TEL OPT. SET Sets the optional items in <FaxTel> mode. (See Chapter 1,
“Advanced Fax Features,” in the Advanced Guide.)
1. RING START TIME Sets the time the machine takes to check whether a call is a
fax or a voice call. (0SEC-30SEC)
2. F/T RING TIME Selects the ring length for voice calls. (15SEC-300SEC)
3. F/T SWITCH
ACTION
Selects whether the machine switches to receive mode after
the ring time has elapsed, or whether if disconnects the call.
– RECEIVE
– DISCONNECT
3. DRPD:SELECT FAX Selects the ring pattern for fax calls.
– DOUBLE RING
– SHORT-SHORT-LONG
– SHORT-LONG-SHORT
– OTHER RING TYPE
–NORMAL RING
FAX SETTINGS (MF6550/MF6560/MF6580 Only)