imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-24
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Receiving Features
You can set the fax receive mode to suit your needs, set the
machine to receive fax documents into memory (memory lock),
and use the external telephone connected to the machine to
receive faxes manually (remote reception). You can also set how
the received documents are printed.
FaxTel: Optional Settings
When you select <FaxTel> in <RX MODE>, you can specify optional
settings as follows:
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3. Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4. Press [ ] or [ ] to select <FAX/TEL OPT.
SET>, then press [OK].
■
5. For <RING START TIME>, use [ ], [ ], or the
numeric keys to specify the duration (0 to 30
seconds) for which the machine attempts to
detect the fax tone before it starts ringing, then
press [OK].
If the machine receives a fax, the machine does not ring and switches
to the receive mode automatically.
The default setting is <6SEC>.
6. For <F/T RING TIME>, use [ ], [ ], or the
numeric keys to specify the duration (15 to 300
seconds) of ringing, then press [OK].
The default setting is <15SEC>.
7. For <F/T SWITCH ACTION>, press [ ] or [ ]
to select the action the machine will take after
the ringing ends, then press [OK].
The default setting is <RECEIVE>.
<RECEIVE>: Receives a fax.
<DISCONNECT>: Disconnects the call.
8. Press [Stop] to return to the standby mode.