MF6595CX Reference Guide

ManualsBrandsCanon ManualsCopierimageCLASS MF6540

Back

TOP

3-10

Before Using the

Machine

Document and Paper

Copying

Sending and Receiving (MF6595cx/

MF6595/MF6590 Only)

Printing and

Scanning

Network (MF6595cx/MF6595/

MF6590/MF6540 Only)

Remote UI (MF6595cx/MF6595/

MF6590/MF6540 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

1 to 2-Sided

You can make two-sided copies from one-sided documents.

1. Set documents.

Place the first page on the platen glass if you are not using the ADF.

2. Press [COPY].

3. Press [2-Sided].

4. Press [ ] or [ ] to select <1 > 2-SIDED>, then

press [OK].

5. Press [ ] or [ ] to select <BOOK TYPE> or

<CALENDAR TYPE>, then press [OK].

<BOOK TYPE>: The front and back sides of the copy will have the

same top-bottom orientation.

<CALENDAR TYPE>: The front and back sides of the copy will have

opposite top-bottom orientations.

For the landscape oriented documents, the front and back sides

of the copy will have the opposite top-bottom orientation when

<BOOK TYPE> is selected.

When <CALENDAR TYPE> is selected, the front and back sides of the

copy will have the same top-bottom orientation.

6. Use the numeric keys to enter the desired copy

quantity (1 to 99).

7. Press [Start].

When you set the document on the platen glass, press [Start] for

each page. When scanning is complete, press [OK].

To cancel all settings, press [Reset].

When you switch the mode by pressing the mode keys such as

[FAX], all settings will be also canceled. If you want to keep the

settings, store the settings in <STANDARD SETTINGS> in <COPY

SETTINGS>. (See “STANDARD SETTINGS,” on p. 11-10.)

Instead of performing step 5, you can just press [OK]. In this case,

the machine makes <BOOK TYPE> copies.

–