imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
3-7
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
2 on 1 Combination
2 on 1 combination automatically reduces two-page document to
fit on the selected paper size. This feature can be used together with
“Collate Copy,” on p. 3-6, “Two-Sided Copy,” on p. 3-8, and “Binding
Hole Erase,” on p. 3-14.
“2 on 1 Combination” cannot be used together with “Original Frame Erase”
or “Book Frame Erase.”
1. Set documents.
Place the first page on the platen glass if you are not using the ADF.
2. Press [COPY].
3. Press [2 on 1].
4. Press [ ] or [ ] to select <ON>, then press
[OK].
■
5. Press [ ] or [ ] to select the size of the
document, then press [OK].
6. Press [ ] or [ ] to select the paper size, then
press [OK].
7. Use the numeric keys to enter the desired copy
quantity (1 to 99).
8. Press [Start].
When you set the document on the platen glass, press [Start] for
each page. When scanning is complete, press [OK].
A maximum of 1/8" (2 to 3 mm) margin will be produced
between the two reduced documents in 2 on 1 combination
copying.
To cancel all settings, press [Reset].
When you switch the mode by pressing the mode keys such as
[FAX], all settings will be also canceled. If you want to keep the
settings, store the settings in <STANDARD SETTINGS> in <COPY
SETTINGS>. (See “STANDARD SETTINGS,” on p. 11-10.)
–
–
–