imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-35
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
SYSTEM SETTINGS
ON Enables restriction of IP address of computers from which data (print/fax jobs) can be sent to
the machine.
1. PERMIT/REJECT Selects whether to permit or reject access from a specified IP address.
REJECT
PERMIT
–
–
2. SET IP ADDRESS Specifies the IP address range. <START IP ADDRESS> and <END IP ADDRESS> must be entered
for each setting.
1. IP ADDRESS 1
2. IP ADDRESS 2
3. IP ADDRESS 3
4. IP ADDRESS 4
–
–
–
–
9. RX MAC ADD SET. Sets whether to activate a MAC address filter.
OFF Disables MAC address filter.
ON Specifies a MAC address filter to access. MAC address must be entered for each setting.
1. PERMIT RX ADD1
2. PERMIT RX ADD2
3. PERMIT RX ADD3
4. PERMIT RX ADD4
5. PERMIT RX ADD5
–
–
–
–
–