imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-24
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
PRINTER SETTINGS
10. PCL SETTINGS*** Sets the PCL printer setting.
1. ORIENTATION Sets the paper orientation.
PORTRAIT
LANDSCAPE
–
–
2. FONT NUMBER Sets the default font typeface for the printer function using the corresponding font numbers.
(0-120) (0)
3. POINT SIZE Specifies a point size for the default font. This item appears when the number in <FONT
NUMBER> is that of a proportionally spaced scalable font. (4.00-999.75) (12.00)
4. PITCH Specifies the pitch for the default font. This item appears when the number in <FONT NUMBER>
is that of a fixed pitch scalable font. (0.44-99.99) (10.00)
5. FORM LINES Sets the number of lines to be printed on a page. (5-128) (60)
6. SYMBOL SET Selects the symbol set most suited to the needs of the host computer. (PC8)
7. CUSTOM PAPER Sets whether to use a custom paper size.
OFF Disables you to specify a custom paper size.
ON Enables you to specify a custom paper size.
1. UNIT OF MEASURE Selects the unit of measurement to specify a custom paper size.
INCHES
MILLIMETERS
–
–
2. X DIMENSION Specifies the horizontal size of the custom paper. (05.00-14.00 inches (127-356 mm)) (14.00)
3. Y DIMENSION Specifies the vertical size of the custom paper. (03.00-08.50 inches (76-216 mm)) (08.50)