imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-14
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)
3. DIRECT TX Sets whether to use <DIRECT TX> as default.
OFF
ON
–
–
9. INIT. FAX STD SET Sets whether to restore <STANDARD SETTINGS> in <FAX SETTINGS> to the default.
OFF
ON
–
–
3. TX SETTINGS Sets the transmission functions.
1. ECM TX Sets whether the ECM (Error Correction Mode) transmission is activated.
ON
OFF
–
–
2. PAUSE TIME Sets the pause time when you insert pause into the dialing sequence. (1SEC-15SEC) (2SEC)
3. AUTO REDIAL Sets whether to redial automatically when the other line is busy or a transmission error occurs.
(See “Redialing Automatically,” on p. 4-21)
ON Customizes the redial operation.
1. REDIAL TIMES Sets the number of retries. (1TIMES-10TIMES) (2 TIMES)
2. REDIAL INTERVAL Sets period of time before redialing. (2MIN.-99MIN.) (2 MIN.)
3. TX ERROR REDIAL Sets whether the machine redials automatically when transmission error occurs.
ON
OFF
–
–