imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-8
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
COMMON SETTINGS
8. REG. PAPER SIZE Sets the paper size for the paper cassette. (See “For the Paper Cassette,” on p. 2-12.)
1. CASSETTE 1 Sets the paper size for paper cassette 1.
2. CASSETTE 2** Sets the paper size for paper cassette 2.
9. ENERGY IN SLEEP Selects power consumption when the machine is in the Sleep mode between two levels.
LOW (Only functional for MF6540/MF6520, or when <RX MODE> is not set to <FaxOnly> for
MF6595cx/MF6595/MF6590)
HIGH
–
–
10. MP TRAY STD SET Sets the standard paper size and type for the multi-purpose tray if you always use a same kind
of paper. (See “For the Multi-Purpose Tray,” on p. 2-13.)
OFF Deactivates the multi-purpose tray standard settings.
ON Activates the multi-purpose tray standard settings.
1. PAPER SIZE Sets paper size as the multi-purpose tray standard.
2. SELECT PAPER TYPE Sets paper type as the multi-purpose tray standard.
11. PAPER FEED SWITCH Selects the paper feed method when you want to make onesided or two-sided prints on
preprinted paper (paper which has logos or patterns already printed on it).
1. MP TRAY Selects the paper feed method for the multi-purpose tray.
SPEED PRIORITY Print speed has priority.
PRINT SIDE The machine starts printing on the side of paper loaded facing up. Print speed becomes slower
for one-sided print.
Only available for LTR, LGL and A4.